Generic filters
FS Logoi
Generic filters

Metso Introduces Furnace for Higher Recovery of Metals

Metso is introducing the compact 4th generation Outotec® Kaldo L Furnace. The upgraded heavy-duty furnace is ideally suited for the melting, reducing and converting of various primary and secondary raw materials.

von | 05.04.24

Metso is introducing the compact 4th generation Outotec® Kaldo L Furnace, ©Metso
©Metso
Outotec Kaldo L Furnace

April 2024 | Metso introduces fourth generation of its Outotec Kaldo L Furnace. The compact furnace is built for higher recovery of metals.

Metso is introducing the compact 4th generation Outotec® Kaldo L Furnace for flexible processing and optimal recovery of metals. The upgraded heavy-duty furnace is ideally suited for the melting, reducing and converting of various primary and secondary raw materials such as concentrates, copper scrap, anode slimes and e-waste.

The Kaldo L Furnace features smooth movement with improved process control. It is also equipped with advanced charging and off-gas systems, enabling a very compact plant layout and high operational flexibility. The technology is part of Metso’s Planet Positive offering.

“We are excited to launch the upgraded Kaldo L Furnace to the market. It will benefit our customers through an increased recovery of metals and longer equipment lifetime with efficient materials handling in a compact process,” explains Jonny Eliasson, Director, Non-Ferrous and Smelting Recycling at Metso.

Metso’s Outotec® Kaldo technology is a well-established solution and has several references globally. It has been successfully used in the precious metals, copper, and lead processing industries for decades and represents the best available TBRC technology for this purpose. Metso has continuously developed the Kaldo Furnace since the 1970s and has substantial references globally.  An Outotec® Kaldo L pilot plant is available for performing customer tests to validate materials and processes.

More Information

The system is fully encapsulated by a furnace casing, thus facilitating ventilation of the whole section, including the ladle car below the furnace. Stray emissions are prevented, resulting in a safe working environment. An advanced hydraulic system allows smooth and safe control of any movement. The heating and converting processes are performed by introducing water-cooled lances mounted in lance wagons with a hydraulic drive. Find out more about Metso’s Outotec® Kaldo L Furnace on metso.com/portfolio/kaldo-furnace

Metso aims to be a frontrunner in sustainable technologies, end-to-end solutions and services for the aggregates, minerals processing and metals refining industries globally. Headquartered in Espoo, Finland, Metso employs over 17,000 people in close to 50 countries and sales for 2023 were about EUR 5.4 billion. The company is listed on the Nasdaq Helsinki.

 

(Source: Metso Corporation/2024)

Bildquelle, falls nicht im Bild oben angegeben:

Jetzt Newsletter abonnieren

Die ganze Welt der Metallurgie, immer in Ihrem Postfach.

Hier anmelden

Weltpremiere bei Heidelberg Materials: Eröffnung der Brevik CCS-Anlage in Norwegen läutet neue Ära des nachhaltigen Bauens ein

Weltpremiere bei Heidelberg Materials: Eröffnung der Brevik CCS-Anlage in Norwegen läutet neue Ära des nachhaltigen Bauens ein

Heidelberg Materials hat mit Brevik CCS in Norwegen die weltweit erste Anlage zur CO₂-Abscheidung und -Speicherung im industriellen Maßstab in der Zementindustrie offiziell eingeweiht. Im Rahmen der feierlichen Zeremonie im Zementwerk Brevik enthüllte S.K.H. Kronprinz Haakon von Norwegen im Beisein des norwegischen Energieministers Terje Aasland und Dr. Dominik von Achten, Vorsitzender des Vorstands von Heidelberg Materials, offiziell eine Gedenktafel aus Beton, die an diesen historischen Meilenstein erinnert. Die Veranstaltung wurde von mehr als 320 Gästen, darunter Branchenvertreter, hochrangige internationale Regierungsvertreter, sowie Vertreter von NGOs und Start-ups besucht.

mehr lesen
SMS group and Acciaierie d’Italia successfully bolster production reliability for tandem cold mill

SMS group and Acciaierie d’Italia successfully bolster production reliability for tandem cold mill

In a remarkable on-site operation, SMS group has successfully modernized the rotary mandrel in the tandem cold rolling mill at Acciaierie d’Italia (ADI) in Genoa, Italy. The cold rolling mill plant in Genova is sole in Italy for its ability to produce approximately 1.5 million tons of tinplate and electrolytic chrome-coated strip annually, which is largely used in the food processing industry.

mehr lesen
ArcelorMittal Europe drängt auf schnellere Umsetzung des Aktionsplans für Stahl und Metalle

ArcelorMittal Europe drängt auf schnellere Umsetzung des Aktionsplans für Stahl und Metalle

ArcelorMittal Europe gibt bekannt, dass es seine DRI- und EAF-Pläne zur Dekarbonisierung der Flachstahlwerke in Bremen und Eisenhüttenstadt leider nicht weiterverfolgen kann. Der Konzern hatte bereits im November 2024 erklärt, dass er keine finalen Investitionsentscheidungen über den Bau neuer DRI-EAF-Anlagen in Europa treffen könne, da sich die politischen, energie- und marktbezogenen Rahmenbedingungen nicht in die erhoffte Richtung entwickelt hatten.

mehr lesen

Fachinformationen für Sie

ewi – elektrowärme international – Ausgabe 01 2015

ewi – elektrowärme international – Ausgabe 01 2015

Themenbereich: Thermoprozesstechnik

Die Fachzeitschrift für die Bereiche der elektrothermischen Prozesstechnik und des elektrisch beheizten ...

Zum Produkt

Berechnung örtlicher Temperaturen in Gutstapeln

Berechnung örtlicher Temperaturen in Gutstapeln

Autor: Ye Li / Volker Uhlig / Dimosthenis Trimis / Subhashis Ray / Peter Wübben
Themenbereich: Thermoprozesstechnik

Der Artikel beschreibt eine Methodik zur numerischen Simulation komplexer, lang andauernder Brennprozesse in einem Industrieofen. Ein dreidimensionales Modell, basierend auf der Finite-Volumen-Methode, wird vorgestellt und auf den Prozess ...

Zum Produkt

ewi – elektrowärme international – Ausgabe 04 2014

ewi – elektrowärme international – Ausgabe 04 2014

Themenbereich: Thermoprozesstechnik

Die Fachzeitschrift für die Bereiche der elektrothermischen Prozesstechnik und des elektrisch beheizten ...

Zum Produkt