Generic filters
FS Logoi
Generic filters

Worldsteel: Crude steel production decreases by -7.1 %

World crude steel production for the 66 countries reporting to the World Steel Association (worldsteel) was 128 million t in January 2016, a -7.1 % decrease compared to January 2015.

von | 29.02.16

China’s crude steel production for January 2016 was 63.2 million t (Mt), a decrease of -7.8 % compared to January 2015. Elsewhere in Asia, Japan produced 8.8 Mt of crude steel in January 2016, a decrease of -2.8 % compared to January 2015. India’s crude steel production was 7.4 Mt, a decrease of -1.2 % compared to January 2015. South Korea produced 5.7 Mt of crude steel in January 2016, down by -4.5 % on January 2015.
In the EU, Germany produced 3.6 Mt of crude steel in January 2016, a decrease of -2.0 % compared to January 2015. Italy produced 1.8 Mt of crude steel, down by -5.3 % on January 2015. Spain produced 1.2 Mt of crude steel, down by -9.5 % compared to January 2015.
Turkey’s crude steel production for January 2016 was 2.6 Mt, up by 0.8 % on January 2015.
In January 2016, Russia produced 5.6 Mt of crude steel, down by -10.6 % over January 2015. Ukraine produced 1.9 Mt of crude steel, up by 3.6 % compared to the same month 2015.
The US produced 6.6Mt of crude steel in January 2016, a decrease of -8.8 % compared to January 2015.
Brazil’s crude steel production for January 2016 was 2.5 Mt, down by -17.9 % on January 2015.
The crude steel capacity utilization ratio of the 66 countries in January 2016 was 66.0 %. This is -5.8 percentage points lower than January 2015. Compared to December 2015, it is 0.8 percentage point higher.
(Source: worldsteel)

Bildquelle, falls nicht im Bild oben angegeben:

Jetzt Newsletter abonnieren

Die ganze Welt der Metallurgie, immer in Ihrem Postfach.

Hier anmelden

Closing Conditions erfüllt – Akquise von Betriebsteilen der Buderus Edelstahl GmbH rechtlich vollzogen – Integration in Unternehmensgruppe startet

Closing Conditions erfüllt – Akquise von Betriebsteilen der Buderus Edelstahl GmbH rechtlich vollzogen – Integration in Unternehmensgruppe startet

Nun ist es offiziell: Das Warmwalzwerk für große Walzstahlabmessungen sowie die Mechanische Bearbeitung inklusive der Wärmebehandlung für hochkomplexe Freiformschmiedeteile der Buderus Edelstahl GmbH gehören jetzt zur GMH Gruppe. Die sogenannten „Closing Conditions“ für den Abschluss der Akquise wurden inzwischen erfüllt, die Behörden haben dem Zusammenschluss zugestimmt: damit ist die Übernahme nun auch rechtlich vollzogen.

mehr lesen
EasyGrinder: Automatisierte Nachbearbeitung von Brennteilen durch intelligente Robotertechnologie

EasyGrinder: Automatisierte Nachbearbeitung von Brennteilen durch intelligente Robotertechnologie

Mittels innovativer Robotertechnologie und KI-gestützten 3D-Vision-Systemen wird die wirtschaftliche Automatisierung der Nachbearbeitung von Brennteilen auch bei kleinen Losgrößen ermöglicht. Das System reduziert den Energieverbrauch um bis zu 95 % gegenüber herkömmlichen Entgratmaschinen und erreicht eine Amortisationszeit von 2-3 Jahren und bei Fremdfinanzierung sogar einen sofortigen positiven Cashflow denn die enormen Kosten der Handarbeit entfallen mit der Inbetriebnahme. Die Betrachtungen zeigen eine direkte Lösung für den Fachkräftemangel in der Stahlverarbeitung.

mehr lesen
Decision to Consolidate the Production of Steel Products and Free Forged Products at Osaka Area of Kansai Works into Sanyo Special Steel Co., Ltd.

Decision to Consolidate the Production of Steel Products and Free Forged Products at Osaka Area of Kansai Works into Sanyo Special Steel Co., Ltd.

Nippon Steel Corporation (“Nippon Steel”) and Sanyo Special Steel Co., Ltd. (“Sanyo Special Steel”), a wholly-owned subsidiary of Nippon Steel, were planning to consolidate the production of steel products and free forged products currently produced at Osaka Area of Kansai Works into Sanyo Special Steel in order to generate synergistic effects between the two companies.

mehr lesen
Steel in E-Mobility: How Georgsmarienhütte is Transforming the Automotive Industry with Green Power Premium Steel

Steel in E-Mobility: How Georgsmarienhütte is Transforming the Automotive Industry with Green Power Premium Steel

20,000 revolutions per minute, 98 percent less CO₂, nearly 100 percent recycling rate – the GMH Group demonstrates how modern steel is revolutionizing electromobility. While electric motors place entirely new demands on strength and precision, Germany’s leading electric arc furnace steel producer responds with innovative materials and closed-loop systems. From rotor shafts to gear wheels: A behind-the-scenes look at an industry in transformation.

mehr lesen

Fachinformationen für Sie