Generic filters
Exact matches only
FS Logoi

NCSU Researchers Develop Automated Quality Control for 3D-Printed Metal Parts

North Carolina State University (NCSU) researchers have demonstrated a technique that allows people who manufacture metal machine parts with 3D printing technologies to conduct automated quality control of manufactured parts during the finishing process. The technique allows users to identify potential flaws without having to remove the parts from the manufacturing equipment, making production time more efficient.

von | 24.05.24

Part mounted in CNC machine after final transformation. Origin denoted by arrows and OW; Source: Christopher J. Kelly et al. (2024) Automatic feature-based inspection and qualification for additively manufactured parts with critical tolerances
© Christopher J. Kelly et al. / NCSU
Part mounted in CNC machine after final transformation. Origin denoted by arrows and OW

May 2024 | North Carolina State University (NCSU) researchers have demonstrated a technique that allows people who manufacture metal machine parts with 3D printing technologies to conduct automated quality control of manufactured parts during the finishing process. The technique allows users to identify potential flaws without having to remove the parts from the manufacturing equipment, making production time more efficient.

Brandon McConnell is an assistant research professor in NCSU Edward P. Fitts Department of Industrial and Systems Engineering and co-corresponding author of a paper on the work. He explains:

“One of the reasons people are attracted to 3D printing and other additive manufacturing technologies is that these technologies allow users to quickly replace critical machine components that are otherwise difficult to make outside of a factory. And additive manufacturing tools can do this as needed, rather than dealing with supply chains that can have long wait times. That usually means using 3D printing to create small batches of machine parts on demand.”

After a metal machine part is printed, it requires additional finishing and has to be measured to ensure the part meets critical tolerances. In other words, every aspect of the part must be the right size. Currently, that involves taking a part out of the relevant manufacturing equipment, measuring it, and then putting it back into the manufacturing equipment to make modest adjustments.

“This may need to be done repeatedly, and can take a significant amount of time,” McConnell says. “Our work here expedites that process.”

Specifically, the researchers have integrated 3D printing, automated machining, laser scanning and touch-sensitive measurement technologies with related software to create a largely automated system that produces metal machine components that meet critical tolerances.

Research Team Uses Commercially Available Technology

When end users need a specific part, they pull up a software file that includes the measurements of the desired part. A 3D printer uses this file to print the part, which includes metal support structures. Users then take the printed piece and mount it in a finishing device using the support structure. At this point, lasers scan the mounted part to establish its dimensions. A software program then uses these dimensions and the desired critical tolerances to guide the finishing device, which effectively polishes out any irregularities in the part. As this process moves forward, the finishing device manipulates the orientation of the printed part so that it can be measured by a touch-sensitive robotic probe that ensures the part’s dimensions are within the necessary parameters.

To test the performance of the new approach, researchers manufactured a machine part using conventional 3D printing and finishing techniques, and then manufactured the same part using their new process.

“We were able to finish the part in 200 minutes using conventional techniques; we were able to finish the same part in 133 minutes using our new technique,” McConnell says. “Depending on the situation, saving 67 minutes could be incredibly important. Time is money in most professional settings. And in emergency response contexts, for example, it could be the difference between life and death.”

The researchers note that this work focuses on printing and finishing machine parts that include circles or cylinders, such as pistons. However, the approach could be adapted for machine parts with other features.

“All of the hardware we used in this technique is commercially available, and we outline the necessary software clearly in the paper – so we feel that this new approach could be adopted and put into use almost immediately,” McConnell says. “And we are certainly open to working with partners who are interested in making use of this technique in their operations.”

The paper, “Automatic Feature Based Inspection and Qualification for Additively Manufactured Parts with Critical Tolerances,” is published in the International Journal of Manufacturing Technology and Management. First author of the paper is Christopher Kelly, a former graduate student at NC State who now works for Celonis, Inc. The paper was co-authored by Richard Wysk, professor emeritus in the Fitts Department of Industrial and Systems Engineering; Ola Harrysson, Edward P. Fitts Distinguished Professor in the Fitts Department of Industrial and Systems Engineering; and Russell King, the Henry L. Foscue Distinguished Professor of Industrial and Systems Engineering at NC State.

 

More information

Christopher J. Kelly, Richard A. Wysk, Ola A. Harrysson, Russell E. King, Brandon M. McConnell. Automatic feature-based inspection and qualification for additively manufactured parts with critical tolerances. International Journal of Manufacturing Technology and Management, 2024; 38 (3): 236 DOI: 10.1504/IJMTM.2024.138337

The work was done with support from the U.S. Army Research Office, under grant number W911NF1910055.

The paper is also available at North Carolina State University online-library: repository.lib.ncsu.edu

 

(Source: NCSU/2024)

Jetzt Newsletter abonnieren

Brennstoff für Ihr Wissen, jede Woche in Ihrem Postfach.

Hier anmelden

Siemens collaborates with Samsung Foundry
Siemens collaborates with Samsung Foundry

July 2024 | Siemens Digital Industries Software announced that, in collaboration with Samsung Foundry, they have developed compelling new capabilities for the manufacture of multi-die packaged designs at advanced nodes and achieved a host of new product certifications for many of Siemens’ industry-leading IC design and verification technologies.

mehr lesen

Fachinformationen für Sie

Prozesswärme – 07 2019

Prozesswärme – 07 2019

Themenbereich: Thermoprozesstechnik

...

Zum Produkt

Geringere Emissionen und höhere Energieeffizienz: Additive Fertigung in der Brennertechnik

Geringere Emissionen und höhere Energieeffizienz: Additive Fertigung in der Brennertechnik

Autor: Jens te Kaat, Erik Feldbaum, Philipp Gabriel, Christian Köhler
Themenbereich: Thermoprozesstechnik

Durch den 3D-Druck wird es möglich, Bauteile mit mehreren hundert Gasdüsen zu produzieren, mit deren Hilfe eine exakte Dosierung von Gas möglich wird. Durch den dadurch effizienteren Brennvorgang wird Erdgas eingespart und die Bildung von ...

Zum Produkt

Einsatz von 3D-gedruckten Induktoren aus Kupfer in der induktiven Wärmebehandlung

Einsatz von 3D-gedruckten Induktoren aus Kupfer in der induktiven Wärmebehandlung

Autor: Alexander Ulferts, Frank Andrä, Dirk Zimmermann
Themenbereich: Thermoprozesstechnik

Moderne 3D-Druck-Fertigungstechnologien erfahren aktuell einen ungebrochenen Hype. Der sich seit einigen Jahren ausprägende Trend des 3D-Kunststoffdrucks setzt sich im Bereich der Metalle fort und immer mehr Werkzeuge und Komponenten werden im ...

Zum Produkt