Generic filters
FS Logoi
Generic filters

Deutsche ReGas and Outokumpu join efforts to decarbonize process technologies at their Mukran sites

Deutsche ReGas signed a Memorandum of Understanding with Outokumpu, the global leader in sustainable stainless steel, on the utilization of industrial process heat and sustainable electricity for decarbonizing their process technologies.

von | 05.06.25

LNG regasification takes place at Neptune in the industrial port of Mukran by the energy terminal operator Deutsche ReGas (Source: Jan-Peter Haack / Deutsche ReGas)
LNG regasification takes place at Neptune in the industrial port of Mukran by the energy terminal operator Deutsche ReGas (Source: Jan-Peter Haack / Deutsche ReGas)

The process heat and sustainable electricity will be sourced from a new biocarbon plant that Outokumpu plans to operate in Mukran Port. The collaboration would significantly increase the energy efficiency of both, the Energie-Terminal “Deutsche Ostsee” of Deutsche ReGas and Outokumpu’s biocarbon plant leveraging on the potential to strengthen Mukran Port as a future-proof energy hub.

“Following Outokumpu’s decision to choose Mukran Port as its location, this collaboration is the logical next move for our companies,” explains Ingo Wagner, CEO of Deutsche ReGas. “The process heat will allow us to cover a significant amount of our energy needs. The intended cooperation highlights our commitment to decarbonizing our terminal and reducing operational costs for our customers.”

 

“Replacing fossil coke with biocoke is currently the best available technology and most important use case for Outokumpu to reduce our direct emissions”, says Stefan Erdmann, Chief Technology Officer of Outokumpu Group. “The cooperation with Deutsche ReGas further enhances the value chain of our biocarbon plant by commercialising the side-streams and reinforces our decision to settle in Mecklenburg-Vorpommern,” according to Erdmann.

As announced in December 2024, Outokumpu plans to annually produce 15,000 tonnes of biocarbon, using waste wood biomass, for the further delivery to its Tornio biocoke agglomeration plant – a new facility at the grounds of Outokumpu’s fully integrated stainless steel mill in Finland. Mukran Port serves ideal shipment logistics for Outokumpu’s requirements. Valuable byproducts from the process in Mukran include side-streams such as green energy from process heat.

The Outokumpu EvoCarbon factory in Mukran, Germany is expected to ramp-up its initial biocarbon production during summer 2026, and subsequently the delivery of process heat, to convert into green energy, for local consumption by Deutsche ReGas and the municipality of Sassnitz will follow upon completion of the factory processes.

“We wholeheartedly welcome the planned cooperation between ReGas and Outokumpu in Mukran. This demonstrates the achievable synergies among different users at Mukran Port and the strategic direction of our port with its infrastructure options,” added Henry Forster, CEO of Fährhafen Sassnitz GmbH.

(Source: Deutsche ReGas)

Bildquelle, falls nicht im Bild oben angegeben:

Jetzt Newsletter abonnieren

Die ganze Welt der Metallurgie, immer in Ihrem Postfach.

Hier anmelden

11. Dortmunder Schleifseminar – Aktuelle Technologien am Institut für Spanende Fertigung

11. Dortmunder Schleifseminar – Aktuelle Technologien am Institut für Spanende Fertigung

Am 4. und 5. März 2026 findet das 11. Dortmunder Schleifseminar des Instituts für Spanende Fertigung der TU Dortmund statt. Angekündigt sind hochkarätige Vorträge aus Industrie und Forschung, Live-Vorführungen im Versuchsfeld und die Vorstellung der Jubiläumsausgabe des Fachbuchs „Schleifen, Honen, Läppen und Polieren” – 100 Jahre geballtes Wissen zur Zerspanung mit geometrisch unbestimmten Schneiden.

mehr lesen
Industriepolitik 2026:  „Raus aus dem Jammertal, rauf auf den Lösungsweg“

Industriepolitik 2026: „Raus aus dem Jammertal, rauf auf den Lösungsweg“

Der Wirtschaftsverband Stahl- und Metallverarbeitung (WSM) fordert konkrete Sofortmaßnahmen zur Stärkung der Wettbewerbsfähigkeit: Aussetzung des nationalen CO2-Preises für die Industrie und Abschaffung des Solidaritätszuschlags. „Wir müssen raus aus dem Jammertal, rauf auf den Lösungsweg”, betont WSM-Hauptgeschäftsführer Christian Vietmeyer. Beide Maßnahmen seien kurzfristig umsetzbar und würden 2026 direkt wirken.

mehr lesen

Fachinformationen für Sie

Industrie 4.0 – Prozesse und Ressourcen effizient managen

Industrie 4.0 – Prozesse und Ressourcen effizient managen

Vor dem Hintergrund der steigenden Rohstoffkosten rückt der effiziente Ressourceneinsatz immer mehr in den Fokus der Unternehmen. Das Management der kompletten Prozesskette von der Produktgestaltung über die Produktion und Logistik bis hin zu ...

Zum Produkt

Prozesswärme – 03 2019

Prozesswärme – 03 2019

Themenbereich: Thermoprozesstechnik

Die Ausgabe 3 der PROZESSWÄRME erscheint pünktlich zum Messequartett GIFA, METEC, THERMPROCESS und NEWCAST in Düsseldorf. Im großen Sonderteil erfahren Sie alles rund um die Messen mit besonderem Schwerpunkt auf GIFA und METEC – allgemeine ...

Zum Produkt

„GasQualitaetGlas“: Lokale Erdgasbeschaffenheiten und Auswirkungen auf industrielle Gasverbraucher (Teil 1)

„GasQualitaetGlas“: Lokale Erdgasbeschaffenheiten und Auswirkungen auf industrielle Gasverbraucher (Teil 1)

Autor: Jörg Leicher, Tim Schneider, Tim Nowakowski, Anne Giese, Klaus Görner, Bernhard Fleischmann, Nils-Holger Löber
Themenbereich: Thermoprozesstechnik

Der Erdgasmarkt durchläuft derzeit tiefgreifende Veränderungen, mit Auswirkungen nicht nur für die Gaswirtschaft, sondern auch für viele Endverbraucher. Ein Thema, das insbesondere für industrielle Endverbraucher immer mehr in den Fokus rückt, ist ...

Zum Produkt