Generic filters
FS Logoi
Generic filters

Report: Revamping of reheating furnaces

Revamping of the furnaces is in many cases the best choice for increasing the production profitability in accordance with criteria of sustainability. A considerable number of reheating furnaces erected in the last decades of the past century are still in operation today. Such furnaces can’t often continue yielding acceptable throughput, product quality, fuel consumption, and pollutant emissions. According to the market demand comes the time to take a decision about the future of a furnace: continue squeezing the plant, stop or dismantle it, maybe building a new one or most likely restructuring. The answer is the result of an overall technical and economic analysis where the market demand is fulfilled only by a profitable and sustainable production.

von | 22.12.15

Read the article by Massimiliano Fantuzzi. > To the article

Bildquelle, falls nicht im Bild oben angegeben:

Jetzt Newsletter abonnieren

Die ganze Welt der Metallurgie, immer in Ihrem Postfach.

Hier anmelden

Closing Conditions erfüllt – Akquise von Betriebsteilen der Buderus Edelstahl GmbH rechtlich vollzogen – Integration in Unternehmensgruppe startet

Closing Conditions erfüllt – Akquise von Betriebsteilen der Buderus Edelstahl GmbH rechtlich vollzogen – Integration in Unternehmensgruppe startet

Nun ist es offiziell: Das Warmwalzwerk für große Walzstahlabmessungen sowie die Mechanische Bearbeitung inklusive der Wärmebehandlung für hochkomplexe Freiformschmiedeteile der Buderus Edelstahl GmbH gehören jetzt zur GMH Gruppe. Die sogenannten „Closing Conditions“ für den Abschluss der Akquise wurden inzwischen erfüllt, die Behörden haben dem Zusammenschluss zugestimmt: damit ist die Übernahme nun auch rechtlich vollzogen.

mehr lesen
EasyGrinder: Automatisierte Nachbearbeitung von Brennteilen durch intelligente Robotertechnologie

EasyGrinder: Automatisierte Nachbearbeitung von Brennteilen durch intelligente Robotertechnologie

Mittels innovativer Robotertechnologie und KI-gestützten 3D-Vision-Systemen wird die wirtschaftliche Automatisierung der Nachbearbeitung von Brennteilen auch bei kleinen Losgrößen ermöglicht. Das System reduziert den Energieverbrauch um bis zu 95 % gegenüber herkömmlichen Entgratmaschinen und erreicht eine Amortisationszeit von 2-3 Jahren und bei Fremdfinanzierung sogar einen sofortigen positiven Cashflow denn die enormen Kosten der Handarbeit entfallen mit der Inbetriebnahme. Die Betrachtungen zeigen eine direkte Lösung für den Fachkräftemangel in der Stahlverarbeitung.

mehr lesen
Decision to Consolidate the Production of Steel Products and Free Forged Products at Osaka Area of Kansai Works into Sanyo Special Steel Co., Ltd.

Decision to Consolidate the Production of Steel Products and Free Forged Products at Osaka Area of Kansai Works into Sanyo Special Steel Co., Ltd.

Nippon Steel Corporation (“Nippon Steel”) and Sanyo Special Steel Co., Ltd. (“Sanyo Special Steel”), a wholly-owned subsidiary of Nippon Steel, were planning to consolidate the production of steel products and free forged products currently produced at Osaka Area of Kansai Works into Sanyo Special Steel in order to generate synergistic effects between the two companies.

mehr lesen
Steel in E-Mobility: How Georgsmarienhütte is Transforming the Automotive Industry with Green Power Premium Steel

Steel in E-Mobility: How Georgsmarienhütte is Transforming the Automotive Industry with Green Power Premium Steel

20,000 revolutions per minute, 98 percent less CO₂, nearly 100 percent recycling rate – the GMH Group demonstrates how modern steel is revolutionizing electromobility. While electric motors place entirely new demands on strength and precision, Germany’s leading electric arc furnace steel producer responds with innovative materials and closed-loop systems. From rotor shafts to gear wheels: A behind-the-scenes look at an industry in transformation.

mehr lesen

Fachinformationen für Sie