The 45-MN aluminium extrusion press will be installed by SMS group in a newly established production hall at the Singen site. With the new plant, Constellium Singen will be able to increase its production capacity of high-quality aluminium profiles of most different cross-sectional geometries and also to respond to the growing demand by the automotive industry more flexibly.
The 45-MN front-loading extrusion press will be built to SMS group’s latest design and be equipped with the highly precise linear guidance system for all moving main components of the press, with servo drive technology for all auxiliary functions as well as the proven EcoDraulic concept to reduce energy consumption of the hydraulic pumps. Using the EcoDraulic system permits energy savings of up to 10 % to be achieved as compared to modern extrusion presses operating without that system. The intelligent start-stop automation deactivates all hydraulic pumps not required for the extrusion process.
Another highlight of the press will be the self-adjusting, moving discard shear which automatically adapts to the height of the tool package and ensures optimum and clean cuts. The scope of supply will include further crucial auxiliaries such as billet loader and dummy block lubrication system. An electrically operated linear billet loader will make sure the aluminium billets are safely and quickly fed to the press and, thanks to its telescopic gripper, will reduce non-productive time.
For the control and optimization of the production process, the new 45-MN extrusion press will be equipped with the most modern soft- and hardware package. The smart press control system PICOS.NET (Process Information and Control System) visualizes and coordinates the control of the individual plant areas and provides an array of further useful functions, for example billet length optimization, billet recording as well as fault diagnosis. The process software CADEX (Computer Aided Direct Extrusion) serves for the optimization of the extrusion process. It simulates the process and provides best possible extrusion parameters for isothermal and isobaric extruding. The result is an improvement in product quality at optimum utilization of the press force.
_{(Source: SMS group)}